993TT Bolt-on Application 
Our Blownsix IC cores offer a high density of fins inside the tubes for quick and efficient heat dissipation while utilizing a slightly less dense outer fin setup to provide excellent flow. This technology provides maximum cooling with minimal pressure drop and is the perfect compromise between heat rejection and efficient air flow through the core.
| Price: US $1,985.00 / pair |
Design
This Blownsix IC is a side to side flow design that flows along it's 10.5" length. This IC will be more than sufficient for any highly tuned 993TT cars with applications to 800hp+.
While our IC produces high-flow rate and dramatic temperature reduction which are mainly contributed by two key factors.
Firstly, the great temperature reduction is accomplished by a 60% larger than stock sized intercooler core in which our core has the capacity flow rate of 1300 CFM. Secondly, which in our opinion is the most important element of an IC; the inlet/outlet end-tanks. Our end-tanks are a one piece cast aluminum construction design, formed with little to no corners and are also fully polished on the insides to increase air velocity; therefore also minimizes welding points and greatly increases air flow and reduction in pressure drop which yields to improved efficiency.
Fitment
This unit is a direct bolt-on application for all 96'-98' 993 Twin Turbos without any modifications other than removal of the existing shroud.
Dimensions |
Performance |
||
| Core Size: Overall Size with End-tanks: |
10.5" x 10.5" x 4" per core x 2 33" x 14" x 5.5" |
Efficiency: Flow rate: Leak Tested: |
87% 750 CFM per side: 1300 CFM @ 30 PSI |
| Charge Side Area: Core Volume: Core Volume vs. Stock: |
82 cubic inch 882 cubic inch mass 60% larger |
Pressure Drop: Support HP: |
less than 1% 800+ |
USD $1,985 |
With N.America shipping |
With Int'l shipping |
|
