965 Bolt-on Application 
Our Blownsix IC cores offer a high density of fins inside the tubes for quick and efficient heat dissipation while utilizing a slightly less dense outer fin setup to provide excellent flow. This technology provides maximum cooling with minimal pressure drop and is the perfect compromise between heat rejection and efficient air flow through the core.
| Price: US $1,585.00 |
Design
This Blownsix IC is a front to back(or in our case back to front) flow design that flows along it's 8" length. This IC will be more than sufficient for any highly tuned CIS or EFI cars with applications to 680hp+.
While our IC produces high-flow rate and dramatic temperature reduction which are mainly contributed by two key factors.
Firstly, the great temperature reduction is accomplished by a 65% larger than stock sized intercooler core in which our core has the capacity flow rate of 1020 CFM. Secondly, which in our opinion is the most important element of an IC; the inlet/outlet end-tanks. Our end-tanks are a one piece cast aluminum construction design, formed with little to no corners and are also fully polished on the insides to increase air velocity; therefore also minimizes welding points and greatly increases air flow and reduction in pressure drop which yields to improved efficiency.
Fitment
This unit is a direct bolt-on application for all 91'-94 3.3/3.6 C2 Turbos without any modifications, and can also fit on 78'-89' 930 cars with some modifications and removal/relocating the air-conditioning components.
Dimensions |
Performance |
||
| Core Size: Overall Size with End-tanks: |
24.75" x 8" x 4" 26" x 12" x 7" |
Efficiency: Flow rate: Leak Tested: |
87% 1020 CFM @ 30 PSI |
| Charge Side Area: Core Volume: Core Volume vs. Stock: Core Volume vs. IMSA C2T: |
99 cubic inch 792 cubic inch mass 65% larger 10% larger |
Pressure Drop: Support HP: |
less than 1% 680+ |
USD $1,585 |
With N.America shipping |
With Int'l shipping |
|
