930 Full Width Race Application
Our Blownsix IC cores offer a high density of fins inside the tubes for quick and efficient heat dissipation while utilizing a slightly less dense outer fin setup to provide excellent flow. This technology provides maximum cooling with minimal pressure drop and is the perfect compromise between heat rejection and efficient air flow through the core.
| Price: US $1,785.00 |
Design
This Blownsix IC is a front to back(or in our case back to front) flow design that flows along it's 8.5" length. This IC will be more than sufficient for any highly tuned CIS cars or EFI cars application to 800hp+.
While our IC produces high-flow rate and dramatic temperature reduction which are mainly contributed by two key factors.
Firstly, the great temperature reduction is accomplished by a huge 952 cubic inch sized intercooler core in which has the capacity flow rate of 1250 CFM. Secondly, which in our opinion is the most important element of an IC; the inlet/outlet end-tanks. Our end-tanks are a one piece cast aluminum construction design, formed with little to no corners and are also fully polished on the insides to increase air velocity; therefore minimizes welding points and greatly increases air flow and reduction in pressure drop which yields to improved efficiency.
Fitment
This IC is NOT a bolt-on application and will require some modifications; this unit is the ideal IC for race cars or for ones in search of monster HP.
Dimensions |
Performance |
||
| Core Size: Overall Size with End-tanks: Inlet/Outlet Diameter: |
16" x 8.5" x 4.5" 16" x 13 x 8.5" 2.5"/3" |
Efficiency: Flow rate: Leak Tested: |
86% 900 CFM @ 30 PSI |
| Charge Side Area: Core Volume: |
116 cubic inch 952 cubic inch mass |
Pressure Drop: Support HP: |
less than 1% 800+ |
USD $1,785 |
With N.America shipping |
With Int'l shipping |
|
