930 Bolt-on Application
Our Blownsix IC cores offer a high density of fins inside the tubes for quick and efficient heat dissipation while utilizing a slightly less dense outer fin setup to provide excellent flow. This technology provides maximum cooling with minimal pressure drop and is the perfect compromise between heat rejection and efficient air flow through the core.
| Price: US $1,285.00 |
Design
This Blownsix IC is a front to back(or in our case back to front) flow design that flows along it's 8.5" length. This IC will be more than sufficient for any highly tuned CIS or EFI cars for applications of 550hp or more.
While our IC produces high-flow rate and dramatic temperature reduction which are mainly contributed by two key factors.
Firstly, the great temperature reduction is accomplished by a 250% larger than stock sized intercooler core which has the capacity flow rate of 900 CFM. Secondly, in our opinion, the most important element of an IC; the inlet/outlet end-tanks. Our end-tanks are a one piece cast aluminum construction design, formed with little to no corners and are fully polished on the insides to increase air velocity; also in which minimizes welding points and greatly increases air flow and reduction in pressure drop which yields to improved efficiency.
Fitment
This unit is a direct bolt-on application for all 78'-89 911 Turbo/930s while retaining all factory air-conditioning components.
Dimensions |
Performance |
||
| Core Size: Overall Size with End-tanks: |
16" x 8.5" x 4.5" 16" x 13 x 8.5" |
Efficiency: Flow rate: |
87% 900 CFM |
| Charge Side Area: Core Volume: Core Volume vs. Stock: |
72 cubic inch 612 cubic inch mass 250% larger |
Leak Tested: Pressure Drop: Support HP: |
@ 30 PSI less than 1% 550+ |
|
With N.America shipping |
With Int'l shipping |
|
